All Links below will open in a New Window.

 

 LATHES

  AHL Series LATHES

  AHL-1840/1860/1880/2140/2160/2180/21120

   AHL-1840V/1860V/1880V/2140V/2160V/

   2180V/21120V

Photo shown model: AHL-21120 Photo shown model: AHL-2160V
  • All models with mechanical clutch. (excluded E.V.S. model)
  • All models with auto lubrication system to headstock & external tank for cooling the oil
  • All models meet CE. (on request)
  • All models with 80mm (3.149") spindle bore, ASA D1-8.
   
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 12" chuck
  2. Dead center MT.5
  3. Dead center MT.5 with carbide tip
  4. Spindle center sleeve MT.7
  5. Level pads......8 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 12" chuck
  2. 4-Jaws independent chuck 12" for 18....or 14" for 21...
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Chuck safety guard
  6. Hydraulic copying attachment
  7. Tool post grinder attachment
  8. Taper turning attachment
  9. Electrical system for CE
  10. Protect cover on leadscrew for CE
  11. Steady rest w/ball bearing
  12. Follow rest w/bronze tip
  13. Faceplate 14"
  14. Drill chuck & arbor
  15. Rotating center MT.5
  16. Halogen lamp
  17. Quick change tool post
  18. Carriage micro stop set
  19. Digital read out system
  20. Full length splash guard

LUBRICATION

  • Oil sight window for efficient check of oil levelaction.
  • Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting
  • Splash lubrication in feed gearbox & apron.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

CARRIAGE & SLIDE

    • Anti-Float design backlash eliminator
      fitted in cross slide nut.
    • Safety clutch at feed shaft.
    • One shot lubrication in carriage & top slide.
    • Dual dials supply inch system screw.
    • Metric dial supply metric system only.

SAFETY FEATURES

    • Nylon safety gears in end train.
    • Shear pin in leadscrew.
 
SPECIFCATIONS
  MODEL AHL-1840
AHL-1860
AHL-1880
AHL-2140
AHL-2160
AHL-2180
AHL-21120
AHL-1840V
AHL-1860V
AHL-1880V
AHL-2140V
AHL-2160V
AHL-2180V
AHL-21120V
Capacity Height of centers 230 mm (9.055") 271 mm (10.67") 230 mm (9.055") 271 mm (10.67")
Swing over bed 460 mm (18.11") 533 mm (20.98") 460 mm (18.11") 533 mm (20.98")
Swing in gap 710 mm (27.95") 790 mm (31.10") 710 mm (27.95") 790 mm (31.10")
Swing over cross slide 280 mm (11.02") 356 mm (14.01") 280 mm (11.02") 356 mm (14.01")

Distance between

centers

1000 mm
(40")
1500 mm
(60")
2000 mm
(80")
1000 mm
(40")
1500 mm
(60")
2000 mm
(80")
3000 mm
(120")
1000 mm
(40")
1500 mm
(60")
2000 mm
(80")
1000 mm
(40")
1500 mm
(60")
2000 mm
(80")
3000 mm
(120")
Width of bed 345 mm (13.58")
Gap width in front of faceplate 250 mm (9.84")

Headstock
and
Main

Spindle

Spindle nose, internal

taper

D1-8, MT.No.7
Spindle center sleeve MT. No.7 x MT. No.5
Spindle bore 80 mm (3.149")
Spindle speed: Gear steps
/
Range
4 steps / L 18~55 R.P.M.

M 55~180 R.P.M.
MH 180~600 R.P.M.
H 600~1800 R.P.M.
Carriage

Length on bed /

Width of carriage

543 mm (21.37") / 542 mm (21.33")
Cross slide travel 272 mm (10.7")
Top slide travel 137 mm (5.39")
Threads
and
Feeds

Whitworth threads: Kinds / Range

38 Kinds / 2~72 T.P.I.

Metric threads: Kinds /

Range

40 Kinds / 0.4~14 mm

D.P. threads: Kinds

/ Range

21 Kinds / 8~44 D.P.

M.P. threads: Kinds

/ Range

18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter 76 mm (3")
Quill travel 165 mm (6.5")
Taper of center MT.No.5
Motor Main spindle
10HP 12.5HP  
AC 9.375kW (12.5HP), lnverter

Forced lubrication

for HD.


1/4HP
Coolant pump 1/8HP

Measure

ment

Weight (Net /Gross)

Approx.

2000 kgs
/
2350 kgs
2350 kgs
/
2700 kgs
2700 kgs
/
3100 kgs
2300 kgs
/
2650 kgs
2650 kgs
/
3000 kgs
3000 kgs
/
3400 kgs
3700 kgs
/
4200 kgs
2000 kgs
/
2350 kgs
2350 kgs
/
2700 kgs
2700 kgs
/
3100 kgs
2300 kgs
/
2650 kgs
2650 kgs
/
3000 kgs
3000 kgs
/
3400 kgs
3700 kgs
/
4200 kgs

Packing

sizes

Length 2535 mm
(99.8")
3035 mm
(119.5")
3535 mm
(139.2")
2535 mm
(99.8")
3035 mm
(119.5")
3535 mm
(139.2")
4624 mm
(182")
2535 mm
(99.8")
3035 mm
(119.5")
3535 mm
(139.2")
2535 mm
(99.8")
3035 mm
(119.5")
3535 mm
(139.2")
4624 mm
(182")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

  BHL Series LATHES

  BHL-1550   BHL-1550V

Photo shown model : BHL-1550 w / protect cover on leadscrew

  Photo shown model: BHL-1550V

  • All models with mechanical clutch. (excluded E.V.S. model)
  • All models with auto lubrication system to headstock & external tank for cooling the oil
  • All models meet CE. (on request)
  • All models with 56mm (2.2") spindle bore, ASA D1-6.

   

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  • Backplate for 9" chuck
  • Dead center MT.4
  • Dead center MT.4 with carbide tip
  • Spindle center sleeve MT.6
  • Level pads......8 pcs
  • Tool set & Box
  • Operation manual & parts list

OPTIONAL ACCESSORIES:

  • 3-Jaws scroll 9" chuck
  • 4-Jaws independent 10" chuck
  • 5C collet closer attachment
  • 5C collets (metric or inch)
  • Driving plate with dog
  • Chuck safety guard
  • Hydraulic copying attachment
  • Tool post grinder attachment
  • Taper turning attachment
  • Electrical system for CE
  • Protect cover on leadscrew for CE

 

  • Steady rest w/ball bearing
  • Follow rest w/bronze tip
  • Faceplate 12"
  • Drill chuck & arbor
  • Rotating center MT.4
  • Halogen lamp
  • Quick change tool post
  • Carriage micro stop set
  • Digital read out system
  • Full length splash guard

LUBRICATION

  • Oil sight window for efficient check of oil levelaction.
  • Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting
  • Splash lubrication in feed gearbox & apron.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.
 
SPECIFCATIONS
  MODEL BHL-1550 BHL-1550V
Capacity Height of centers 190 mm (7.48")
Swing over bed 387 mm (15.23")
Swing in gap 610 mm (24")
Swing over cross slide 238 mm (9.37")
Distance between centers 1250 mm (50")
Width of bed 280 mm (11")
Gap width in front of faceplate 265mm (10.43")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-6, MT.No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore 56 mm (2.2")
Spindle speed: Gear steps
/
Range

4 steps / L 22~72 R.P.M.

M 70~235 R.P.M.
MH 235~780 R.P.M.
H 753~2500 R.P.M.
Carriage Length on bed / Width of carriage 484 mm (19.05") / 450 mm (17.71")
Cross slide travel 235 mm (9.25")
Top slide travel 120 mm (4.72")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter 59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT.No.4
Motor Main spindle 7.5HP AC 5.5kW (7.5HP), lnverter
Forced lubrication for HD.
1/4HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1450 kgs / 1700 kgs
Packing sizes Length 2580 mm (101.58")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

  CL Series LATHES

   CL-1740/1760/1740V/1760V

 
 
Photo shown model: CL-1740  
  • E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 52.5mm (2.066") spindle bore, ASA D1-6.
  • All models cross slide is hardened and ground to prolong operation life.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 9" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.4
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard

CARRIAGE & SLIDE

    • Anti-Float design backlash eliminator
      fitted in cross slide nut.
    • Safety clutch at feed shaft.
    • One shot lubrication in carriage & top slide.
    • Dual dials supply inch system screw.
    • Metric dial supply metric system only.
  1. SAFETY FEATURES
    • Nylon safety gears in end train.
    • Shear pin in leadscrew.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
SPECIFCATIONS
  MODEL CL-1740
CL-1760 CL-1740V
CL-1760V
Capacity Height of centers 216 mm (8.5")
Swing over bed 435 mm (17")
Swing in gap 622 mm (24.48")
Swing over cross slide 277 mm (10.9")
Distance between centers 1000 mm (40") 1500 mm (60") 1000 mm (40") 1500 mm (60")
Width of bed 305 mm (12")
Gap width in front of faceplate 120 mm (4.72")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-6, MT.No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore 52.5 mm (2.066")
Spindle speed: Gear steps
/
Range
8 steps
4P
OPT.
/ 80~2000 R.P.M.
16 steps
4P / 8P
/ 8P 40~1000 R.P.M.

4P 80~2000 R.P.M.
2 steps /
4P
L 20~400 R.P.M.


H 400~2500 R.P.M.
Infinitely variable  
Carriage Length on bed / Width of carriage 440 mm (17.32") / 477 mm (18.77")
Cross slide travel 235 mm (9.25")
Top slide travel 160 mm (6.3")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter 59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT.No.4
Motor Main spindle 5HP 4P OPT. 7.5HP 4P/3.75 HP 8P AC 3.7kW (5HP), lnverter
Forced lubrication for HD.
1/4HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1600 kgs / 1900 kgs 1850 kgs / 2150 kgs 1600 kgs / 1900 kgs 1850 kgs / 2150 kgs
Packing sizes Length 2400 mm (94.5") 2900 mm (114.2") 2400 mm (94.5")

2900 mm (114.2")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

  ERL Series LATHES

   ERL-1330/1340

   ERL-1330V/1340V

Photo shown model : ERL-1340 w/protect cover on leadscrew Photo shown model: ERL-1340V
  • All models with oil bathed lubrication system to headstock.
  • All models meet CE. (on request)
  • All models with 40mm (1.57") spindle bore, ASA D1-4.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 7" chuck
  2. Dead center MT.3
  3. Dead center MT.3 with carbide tip
  4. Spindle center sleeve MT.5
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.3
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

CARRIAGE & SLIDE

    • Anti-Float design backlash eliminator
      fitted in cross slide nut.
    • Safety clutch at feed shaft.
    • One shot lubrication in carriage & top slide.
    • Dual dials supply inch system screw.
    • Metric dial supply metric system only.

SAFETY FEATURES

    • Nylon safety gears in end train.
    • Shear pin in leadscrew.
 
SPECIFCATIONS
  MODEL ERL-1330
ERL-1340 ERL-1330V
ERL-1340V
Capacity Height of centers 171 mm (6.73")
Swing over bed 340 mm (13.38")
Swing in gap 512 mm (20")
Swing over cross slide 210 mm (8.26")
Distance between centers 760 mm (30") 1000 mm (40") 760 mm (30") 1000 mm (40")
Width of bed 230 mm (9")
Gap width in front of faceplate 150 mm (5")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-4, MT. No.5
Spindle center sleeve MT. No.5 x MT. No.3
Spindle bore 40 mm (1.57")
Spindle speed: Gear steps
/
Range
8 steps
4P
OPT.
/ 80~2000 R.P.M.
16 steps
4P / 8P
/ 4P 50~1305 R.P.M.

2P 100~2570 R.P.M.
2 steps /
4P
L 100~500 R.P.M.


H 500~3000 R.P.M..
Infinitely variable  
Carriage Length on bed / Width of carriage 400 mm (15.748") / 38 mm (15.118")
Cross slide travel 180 mm (7")
Top slide travel 100 mm (4")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 mm (0.002"~0.067")
Cross feeds 0.025~0.85 mm (0.001"~0.034")
Tailstock Quill diameter 50 mm (1.968")
Quill travel 112 mm (4.5")
Taper of center MT.No.3
Motor Main spindle 3HP 4P OPT.5 HP 2P/2.5HP 4P AC 2.2kW (3HP), Inverter
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 850 / 1000 kgs 1000 / 1200 kgs 850 / 1000 kgs 1000 / 1200 kgs
Packing sizes Length 2000 mm (78.8") 2270 mm (89.4") 2000 mm (78.8")

2270 mm (89.4")
Width x Height Width 965 mm (38") x Height 1745 mm (68.7")

Go to Top of Page.

 

  ML Series LATHES

  ML-1740/1760/2040/2060/1740V/1760V/2040V/2060V  

 

Photo shown model: ML-1760V

 

  • E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 80mm (3.149") spindle bore, ASA D1-6.
  • All models cross slide is hardened and ground to prolong operation life.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 10" chuck
  2. Dead center MT.5
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve........85mm Taper 1/19.18
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 10" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.4
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

CARRIAGE & SLIDE

    • Anti-Float design backlash eliminator
      fitted in cross slide nut.
    • Safety clutch at feed shaft.
    • One shot lubrication in carriage & top slide.
    • Dual dials supply inch system screw.
    • Metric dial supply metric system only.

SAFETY FEATURES

    • Nylon safety gears in end train.
    • Shear pin in leadscrew.
 
SPECIFCATIONS
  MODEL ML-1740
ML-1760
ML-2040
ML-2060
ML-1740V
ML-1760V
ML-2040V
ML-2060V
Capacity Height of centers 216 mm (8.5") 254 mm (10") 216 mm (8.5") 254 mm (10")
Swing over bed 435 mm (17") 508 mm (20") 435 mm (17") 508 mm (20")
Swing in gap 622 mm (24.48") 698 mm (27.48") 622 mm (24.48") 698 mm (27.48")
Swing over cross slide 277 mm (10.9") 353 mm (13.89") 277 mm (10.9") 353 mm (13.89")
Distance between centers 1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
Width of bed 305 mm (12")
Gap width in front of faceplate 195 mm (7.67")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-6, 85 mm Taper 1/19.18
Spindle center sleeve 85 mm Taper 1/19.18 x MT. No.5
Spindle bore 80 mm (3.149")
Spindle speed: Gear steps
/
Range
3 steps / L 30~125 R.P.M.

M 125~450 R.P.M.
H 450~2200 R.P.M.
Infinitely variable  
Carriage Length on bed / Width of carriage 440 mm (17.32") / 477 mm (18.77")
Cross slide travel 235 mm (9.25") 272 mm (10.7") 235 mm (9.25") 272 mm (10.7")
Top slide travel 160 mm (6.3")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter 59 mm (2.322")
Quill travel 127 mm (5")
Taper of center MT.No.4
Motor Main spindle 7.5HP AC 5.5kW (7.5HP), lnverter
Forced lubrication for HD.
1/4HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1700 kgs
/
2000kgs
1850 kgs
/
2150kgs
1750 kgs
/
2050kgs
1900 kgs
/
2200kgs
1700 kgs
/
2000kgs
1850 kgs
/
2150kgs
1750 kgs
/
2050kgs
1900 kgs
/
2200kgs
Packing sizes Length 2400 mm
(94.5")
2900 mm
(114.2")
2400 mm
(94.5")
2900 mm
(114.2")
2400 mm
(94.5")

2900 mm
(114.2")
2400 mm
(94.5")
2900 mm
(114.2")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

  RML Series LATHES

    RML-1440/1460/1640/1660

    RML-1440V/1460V/1640V/1660V

Photo shown model: RML-1440

 

  • E.V.S models with auto lubrication system to headstock & external tank for cooling the oil.
  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 52.5mm (2.066") spindle bore, ASA D1-6.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.4
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard

E.V.S. HEADSTOCK

  • Forced lubrication to all running points.
  • Hardened & ground gears and shafts.
  • R.P.M. LED display indicator makes it easy to obtain the optional constant surface
    speed also improves cutting tool life.
  • Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button.
  • Electronic infinitely variable speed with A.C. motor inverter.
  • Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Supported by three points precision bearings (2 taper roller & 1 ball bearing).

E.V.S. MODEL ELECTRIC CONTROL

  • CE electric on request.
  • The electric cabinet is sealed protected against entrance of water, dirt and other contaminants.
  • A main disconnect switch provided.
  • Electric 1/4HP pump for headstock pressure lubrication.
  • Prolong life expectancy of gears and spindle.
  • Combination of forced lubrication and oil bath system in headstock.
SPECIFCATIONS
  MODEL RML-1440
RML-1460
RML-1640
RML-1660
RML-1440V
RML-1460V
RML-1640V
RML-1660V
Capacity Height of centers 180 mm (7.08") 205 mm (8.07") 180 mm (7.08") 205 mm (8.07")
Swing over bed 360 mm (14.17") 410 mm (16.14") 360 mm (14.17") 410 mm (16.14")
Swing in gap 533 mm (20.98") 583 mm (22.95") 533 mm (20.98") 583 mm (22.95")
Swing over cross slide 214 mm (8.42") 264 mm (10.39") 214 mm (8.42") 264 mm (10.39")
Distance between centers 1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
1000 mm
(40")
1500 mm
(60")
Width of bed 260 mm (10.236")
Gap width in front of faceplate 135 mm (5.31") 225 mm (8.85") 135 mm (5.31") 225 mm (8.85") 135 mm (5.31") 225 mm (8.85") 135 mm (5.31") 225 mm (8.85")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-6, MT. No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore 52.5 mm (2.066")
Spindle speed: Gear steps
/
Range
8 steps
4P
OPT.
/ 70~1800 R.P.M.
16 steps
4P / 8P
/ 8P 40~1000 R.P.M.

4P 80~2000 R.P.M.
2 steps /
4P
L 20~400 R.P.M.


H 400~2500 R.P.M.
           25~3000 R.P.M.(OPT.)
Infinitely variable  
Carriage Length on bed / Width of carriage 513 mm (20.19") / 412 mm (16.22")
Cross slide travel 220 mm (8.6")
Top slide travel 130 mm (5.1")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 mm (0.002"~0.067")
Cross feeds 0.025~0.85 mm (0.001"~0.034")
Tailstock Quill diameter 52 mm (2.047")
Quill travel 152 mm (6")
Taper of center MT. No.4
Motor Main spindle
5HP4P OPT.5HP 4P / 2.5HP 8P
AC 3.7kW (5HP), lnverter
Forced lubrication for HD.
1/4HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1350 kgs
/
1500kgs
1450 kgs
/
1600kgs
1400 kgs
/
1550kgs
1500 kgs
/
1650kgs
1350 kgs
/
1500kgs
1450 kgs
/
1600kgs
1400 kgs
/
1550kgs
1500 kgs
/
1650kgs
Packing sizes Length 2270 mm
(89.4")
2785 mm
(109.7")
2270 mm
(89.4")
2785 mm
(109.7")
2270 mm
(89.4")
2785 mm
(109.7")
2270 mm
(89.4")
2785 mm
(109.7")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

  SR Series LATHES

    SR-1840/1860/2140/2160

    SR-1840

Photo shown model :SR-2160 Photo shown model: SR-1840
  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 80mm (3.149") spindle bore, ASA D1-8.
  • All models cross slide is hardened and ground to prolong operation life.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 10" chuck
  2. Dead center MT.5
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve........85mm Taper 1/19.18
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 10" chuck
  2. 4-Jaws independent 12" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Faceplate 14"
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Drill chuck & arbor
  4. Rotating center MT.4
  5. Halogen lamp
  6. Quick change tool post
  7. Carriage micro stop set
  8. Digital read out system
  9. Full length splash guard

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground..

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • Oneshot lubrication in carriage & top slide.
  • Dual dials supply inchsystem screw.
  • Metric dial supply metric system only.

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.
SPECIFCATIONS
  MODEL SR-1840 SR-1860 SR-2140 SR-2160
Capacity Height of centers 231 mm (9.09") 271 mm (10.67")
Swing over bed 460 mm (18.11") 533 mm (20.98")
Swing in gap 650 mm (25.6") 730 mm (28.74")
Swing over cross slide 307 mm (12.1") 387 mm (15.23")
Distance between centers 850 mm (33.46") 1350 mm (53.15") 850 mm (33.46") 1350 mm (53.15")
Width of bed 305 mm (12")
Gap width in front of faceplate 165 mm (6.5")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-8, 85 mm Taper 1/19.18
Spindle center sleeve 85 mm Taper 1/19.18 x MT. No.5
Spindle bore 80 mm (3.149")
Spindle speed: Gear steps
/
Range
Carriage Length on bed / Width of carriage 440 mm (17.32") / 477 mm (18.77")
Cross slide travel 272 mm (10.7")
Top slide travel 160 mm (6.3")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.04~1.0 mm (0.0015"~0.04")
Cross feeds 0.02~0.5 mm (0.00075"~0.02")
Tailstock Quill diameter 68 mm (2.677")
Quill travel 153 mm (6")
Taper of center MT.No.4
Motor Main spindle 7.5HP 10HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1700 / 2000 kgs 1850 / 2150 kgs 1750 / 2050 kgs 1900 / 2200 kgs
Packing sizes Length 2400 mm (94.5") 2900 mm (114.2") 2400 mm (94.5") 2900 mm (114.2")
Width x Height Width 1155 mm (45.5") x Height 1745 mm (68.7")

Go to Top of Page.

 

  TML Series LATHES

    TML-1640/1660

    
Photo shown model: TML-1640

Front moveable slide chip tray

  • All models with one piece solid stand.
  • All models with universal feed gearbox & reversable apron.
  • All models meet CE. (on request)
  • All models with 52.5mm (2.066") spindle bore, ASA D1-6.
    
  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Turcite B coating between the bed and carriage.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • Wider bed way which give absorbs vibration.

STANDARD ACCESSORIES:

  1. Backplate for 9" chuck
  2. Dead center MT.4
  3. Dead center MT.4 with carbide tip
  4. Spindle center sleeve MT.6
  5. Level pads......6 pcs
  6. Tool set & Box
  7. Operation manual & parts list

OPTIONAL ACCESSORIES:

  1. 3-Jaws scroll 9" chuck
  2. 4-Jaws independent 10" chuck
  3. 5C collet closer attachment
  4. 5C collets (metric or inch)
  5. Driving plate with dog
  6. Chuck safety guard
  7. Hydraulic copying attachment
  8. Tool post grinder attachment
  9. Taper turning attachment
  10. Electrical system for CE
  11. Protect cover on leadscrew for CE

 

  1. Steady rest w/ball bearing
  2. Follow rest w/bronze tip
  3. Faceplate 12"
  4. Drill chuck & arbor
  5. Rotating center MT.4
  6. Halogen lamp
  7. Quick change tool post
  8. Carriage micro stop set
  9. Digital read out system
  10. Full length splash guard

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • One shot lubrication in carriage & top slide.
  • Dual dials supply inch system screw.
  • Metric dial supply metric system only.

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.

HEAVY DUTY SPINDLE

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Three point support by high grade precision, machine tool taper roller & ball bearings.
SPECIFCATIONS
  MODEL TML-1640 TML-1660
Capacity Height of centers 205 mm (8.07")
Swing over bed 410 mm (16.14")
Swing in gap 583 mm (22.95")
Swing over cross slide 264 mm (10.39")
Distance between centers 1000 mm (40") 1500 mm (60")
Width of bed 260 mm (10.236")
Gap width in front of faceplate 135 mm (5.31") 225 mm (8.85")
Headstock
and
Main Spindle
Spindle nose, internal taper D1-6, MT. No.6
Spindle center sleeve MT. No.6 x MT. No.4
Spindle bore 52.5 mm (2.066")
Spindle speed: Gear steps
/
Range
Carriage Length on bed / Width of carriage 513 mm (20.19") / 412 mm (16.22")
Cross slide travel 220 mm (8.6")
Top slide travel 130 mm (5.1")
Threads
and
Feeds
Whitworth threads: Kinds / Range 45 Kinds / 2~72 T.P.I.
Metric threads: Kinds / Range 39 Kinds / 0.2~14 mm
D.P. threads: Kinds / Range 21 Kinds / 8~44 D.P.
M.P. threads: Kinds / Range 18 Kinds / 0.3~3.5 M.P.
Longitudinal feeds 0.05~1.7 mm (0.002"~0.067")
Cross feeds 0.025~0.85 mm (0.001"~0.034")
Tailstock Quill diameter 52 mm (2.47")
Quill travel 152 mm (6")
Taper of center MT.No.4
Motor Main spindle 5HP
Coolant pump 1/8HP
Measurement Weight (Net /Gross) Approx. 1500 / 1650 kgs 1600 / 1750 kgs
Packing sizes Length 2270 mm (89.4") 2785 mm (109.7")
Width x Height Width 1120 mm (44.1") x Height 1745 mm (68.7")

Go to Top of Page.

 

DRILLING & TAPPING

To view our Drilling Machines product range, please click on the links provided below
Erlo
ERLO produces a wide range of drilling and tapping machines. Click here
Clausing
Clausing produces a wide rangeof heavy-duty, large capacity radial drills. Click Here

Go to Top of Page.

 

EUMEGA TURRET MILLS

To view please click on the links provided below

www.eumega.com.tw 


Go to Top of Page.